What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
OSI QUAD Foam Window & Door Installation Foam, Aerosol-12/16/2014
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaOSI QUAD Foam Window & Door Installation Foam is a single-component, minimal expansion and low pressure polyurethane foam packaged in a pressurized metal container. It is specifically designed for use with the OSI QUAD Window & Door System. It is dispensed in bead form for sealing gaps and cracks, holes and voids around windows and doors, in most types of construction projects. The product exhibits slight to moderate expansion during application and cures upon reaction with moisture to form a flexible, urethane foam. The closed cell structure of this material provides an R factor of 5 per inch of cured foam making it an efficient method for stopping air and moisture infiltration and expensive warm and cold air loss between windows and rough frame. OSI QUAD Foam will not warp or deform windows and doors. OSI QUAD Foam adheres to all types of building materials including wood, concrete, and drywall and is compatible with asphalt and butyl flexible flashing. It complies with all Federal and State VOC regulations.
Purpose of product.
Usage: Polyurethane foam insulation.Structure such as solid, liquid, aerosol etc.
Form: aerosolDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 14, 2024One Henkel Way
Rocky Hill CT 06067
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)Prepolymer of MDI and polyether polyol 000000-46-4 30.0-60.0 No Polymethylene polyphenyl isocyanate 009016-87-9 10.0-30.0 Yes 
CoC List
Tri-(2-chloroisopropyl)phosphate 013674-84-5 10.0-30.0 Yes CoC List
Dimethyl ether 000115-10-6 5.0-10.0 No Isobutane 000075-28-5 1.0-5.0 Yes CoC List
Propane 000074-98-6 1.0-5.0 No -
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Safety Data Sheet (SDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Safety Data Sheet(SDS) Date that the Safety Data Sheet (SDS) was issued by manufacturer of a specific product.
SDS DATE :December 16, 2014 -
V.O.C Information
Volatile Organic Compounds g/L Without Solvent : 177
-
Warnings
Danger! Extremely flammable. Vapor may cause flash fire. Vapor and spray mist harmful, overexposure may cause lung damage. May cause allergic respiratory and skin reaction, effects may be permanent. Contents under pressure.
Danger! Contains modified polymeric mdi (proprietary), diphenylmethandiisocyanate (9016-87-9), tris(2-chloroisopropyl) phosphate (13674-84-5), dimethylether (115-10-6) and hydrocarbon propellant mixture extremely flammable. Do not use near sparks, heat or open flame. Vapors will accumulate readily and may ignite explosively. Ventilate area during use and until all vapors are gone. Do not smoke. Extinguish all ignition sources. If burned, dried foam may release hazardous decomposition products. Dried foam may be combustible if exposed to flame or temperatures above 240 deg F. Contents under pressure. Avoid prolonged exposure to sunlight or heat from radiators, stoves, hot water and other heat sources that may cause bursting. Do not puncture, incinerate, burn or store above 120 deg F. Do not discard empty can in garbage compactor. Vapor and spray mist harmful. Gives off harmful vapor of solvents and isocyanates. Do not use if you have chronic lung or breathing problems, or if you have ever had a reaction to isocyanates. Use only with adequate ventilation. Where overspray is present, wear appropriate respiratory protection. If you have breathing problems during use, leave the area and get fresh air. If problems linger or occur later, call a doctor or obtain emergency medical treatment; have this label with you. Eye and skin irritant. Avoid contact with eyes and skin. Prolonged or repeated skin contact may lead to sensitization and dermatitis. Wash hands after using. Do not take internally. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. -
Acute health effects
From MSDS:
Health Hazard Data
Emergency Overview: Danger: Flammable aerosol. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Fatal if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Potential Health Effects
Routes of Entry: Inhalation, Ingestion, Skin.
Eye Contact: Contact with eyes can cause eye irritation.
Skin Contact: Persons suffering from allergic reactions to isocyanates should avoid contact with the product. Prolonged or repeated skin contact may cause skin irritation or allergic skin sensitization reaction. This product may discolor the skin. Cured material is difficult to remove.
Inhalation: Inhalation of mist or spray may be harmful. As a result of previous repeated overexposures or a single large dose, certain individuals will develop isocyanate sensitization (chemical asthma) which will cause them to react to a later exposure to isocyanate at levels well below the TLV. Chronic overexposure to isocyanates has been reported to cause lung damage. These symptoms, which can include chest tightness, wheezing, cough, shortness of breath or asthma attack, could be immediate or delayed (up to several hours after exposure). Persons suffering from allergic reactions to isocyanates should avoid contact with the product. May cause dizziness, incoordination, headache, nausea, and vomiting.
Ingestion: Can cause irritation of mucous membranes. Nausea.
-
Chronic health effects
From MSDS:
No information provided. -
Carcinogenicity
Not listed by IARC, NTP or OSHA.
-
Handling information
Keep away from heat, spark and flame. Do not puncture or incinerate pressurized containers. Ensure adequate ventilation, especially in confined areas. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep out of the reach of children. When using do not eat, drink or smoke. Wear suitable protective clothing, gloves and eye/face protection. Store between 50 deg F and 80 deg F. (10 deg and 27 deg C) Store away from heat, sparks, flames, or other sources of ignition. Do not store above 49 deg C (120 deg F). Do not cut or weld container.
-
Disposal information
Dispose of according to Federal, State and local governmental regulations
-
California Prop. 65 Warning
No California Proposition 65 listed chemicals are known to be present.
-
First Aid
Eye Contact: Flush eyes with plenty of water for at least 5 minutes. If irritation persists seek medical attention.
Skin Contact: Fresh foam : Wipe off affected skin area immediately with a soft cloth and then remove residues with vegetable oil; apply skin care product. Cured foam can be removed only mechanically. Immediately wash skin thoroughly with soap and water. Remove contaminated clothes,
Inhalation: If inhaled, immediately remove the affected person to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Ingestion: Do not induce vomiting, seek medical advice immediately.
-
UN Global Harmonization Classification
